---
title: "Slit Seeder Calculator: Blade Depth by Seed Biology, Not Guesswork"
canonical: "https://theyieldgrid.com/slit-seeder-calculator/"
model_id: "tyg-2810"
model_version: "1.0.0"
last_reviewed: "2026-08-24T08:36:28"
reviewed_by: "Umer Hayiat"
---

# Slit Seeder Calculator: Blade Depth by Seed Biology, Not Guesswork

> Canonical calculator: [https://theyieldgrid.com/slit-seeder-calculator/](https://theyieldgrid.com/slit-seeder-calculator/)

## What this calculator does

Home - Free Gardening Calculators & Tools - Slit Seeder Calculator: Blade Depth by Seed Biology, Not Guesswork Setting a slit seeder blade by feel or by copying a neighbor’s rental settings is the single fastest way to guarantee a failed overseeding project. The depth that works for a tall fescue renovation will kill every Kentucky Bluegrass seedling in the furrow. The mechanism is not poor soil contact or wrong timing; it is seed biology. Tiny-seeded grasses carry a finite endosperm energy reserve, and if buried past their biological ceiling, the seedling consumes that reserve in darkness before the sprout reaches the surface.

## Inputs

| Input | ID | Type | Unit | Range or choices | Required |
|---|---|---|---|---|---|
| Grass Seed Type * | `tssdr_grass_type` | select |  | — Select grass type — = ``; Kentucky Bluegrass (KBG) = `kbg`; Tall Fescue = `fescue`; Perennial Ryegrass = `rye` | Yes |
| Slit Seeder Blade Spacing (inches) * | `tssdr_blade_spacing` | number | inches | 0.5 to 4 | Yes |
| Desired Seed Rate (lbs / 1,000 sq ft) * | `tssdr_seed_rate` | number | lbs / 1,000 sq ft | 0.1 to 20 | Yes |
| Current Soil Compaction Level * | `tssdr_compaction` | select |  | — Select compaction level — = ``; Low — recently aerated or loose soil = `low`; Medium — typical lawn with minor compaction = `medium`; High — hard, clay-heavy or heavily trafficked soil = `high` | Yes |

## Outputs

| Output ID | Default state |
|---|---|
| `tssdr_err_grass` | Required |
| `tssdr_err_blade` | Required |
| `tssdr_err_seed` | Required |
| `tssdr_err_compact` | Required |
| `tssdr_results_card` | Results — inches blade depth Slits per sq ft — slices / sq ft Seeds per slit (est.) — seeds per linear foot of slit Recommended Depth Range — inches Seeds per sq ft — seeds / sq ft (estimated) Blade Depth Risk Gauge Safe (0″) Caution (0.5″) Warning (0.75″) Danger (1″+) Recommended Products for This Seeding Job Fill in all fields above and click Calculate to see your slit seeding recommendations. |
| `tssdr_results_inner` | Results — inches blade depth Slits per sq ft — slices / sq ft Seeds per slit (est.) — seeds per linear foot of slit Recommended Depth Range — inches Seeds per sq ft — seeds / sq ft (estimated) Blade Depth Risk Gauge Safe (0″) Caution (0.5″) Warning (0.75″) Danger (1″+) Recommended Products for This Seeding Job |
| `tssdr_out_primary` | — |
| `tssdr_interpretation` |  |
| `tssdr_out_slits` | — |
| `tssdr_out_seeds_slit` | — |
| `tssdr_out_depth_range` | — |
| `tssdr_out_seeds_sqft` | — |
| `tssdr_warnings_wrap` |  |
| `tssdr_results_empty` | Fill in all fields above and click Calculate to see your slit seeding recommendations. |

## Formula and method

Our algorithm calculates the exact depth where your specific seed type remains biologically viable for germination. Show the calculation steps Step 1: Depth Target Lookup by Species Each grass species maps to a biological depth range based on seed size and endosperm energy reserve. KBG: 0.125 to 0.25 inches. Perennial Ryegrass: 0.125 to 0.375 inches. Tall Fescue: 0.25 to 0.50 inches. The midpoint of each range becomes the base depth. Step 2: Compaction Modifier Medium compaction adds 0.0625 inches to the base depth. High compaction adds 0.125 inches. The modified depth is then capped at the species’ hard biological maximum (KBG: 0.25″, Ryegrass: 0.50″, Fescue: 0.75″). Low compaction carries a zero modifier. Step 3: Slits per Square Foot Slits/sqft = 12 / BladeSpacing This is a simple geometric calculation: 12 linear inches per foot divided by the inter-blade distance in inches. A 1.5-inch spacing produces 8 slit rows per foot; a 2-inch spacing produces 6. Step 4: Seed Density Outputs Seeds/sqft = (SeedRate / 1000) x SeedsPerLb Seeds per pound by species (assumed averages): KBG = 2,200,000; Tall Fescue = 227,000; Perennial Ryegrass = 227,000. Seeds per slit per linear foot = Seeds/sqft / Slits/sqft Step 5: Risk Gauge Score RiskPct = (TargetDepth / 1.25) x 100 , capped between 0 and 100. The 1.25-inch ceiling represents a depth well past the fatal threshold for all supported species; 100 on the gauge means dangerous territory regardless of species. Rounding: Target depth is displayed to 3 decimal places. Slits per sq ft to 1 decimal. Seed counts are rounded to the nearest whole number. Assumptions and Limits Seeds-per-pound values are species averages. Premium certified seed lots from suppliers such as Ryan Knorr Lawn Care blends or Twin City Seed may vary from these averages by roughly 10 to 15 percent in either direction. This tool applies to cool-season grasses only. Bermuda, Zoysia, St. Augustine, and other warm-season species have different depth requirements and are not supported. The compaction modifier is a linear approximation. Precise depth compensation requires a soil penetrometer reading, not a visual assessment. Blade depth on a motorized slit seeder varies with operator speed, blade wear, and soil resistance. The calculated depth is a machine-setting target, not a guaranteed furrow depth. Always verify with a physical depth caliper on a test strip before full coverage. Soil temperature is not factored into this calculator. Germination requires a consistent soil temperature at the 2-inch depth; for most cool-season species that threshold is approximately 50 degrees Fahrenheit for KBG and 50 to 65 degrees Fahrenheit for Fescue and Ryegrass. Overseeding into existing turf may require increasing the seed application rate by 25 to 50 percent above the bag’s overseeding recommendation to compensate for competition from established grass. Blade spacing inputs outside 0.5 to 4 inches will return a validation error. Consumer-grade slit seeders typically do not go below 1 inch or above 3 inches in practice. The calculator does not account for pass direction. A perpendicular second pass can double effective seed coverage at the same rate; the output density numbers reflect a single-direction pass.

## Verified worked examples

### Scenario 1: Standard Kentucky Bluegrass Residential Overseeding

Grass Type: Kentucky Bluegrass (KBG) Blade Spacing: 1.5 inches Seed Rate: 3 lbs / 1,000 sq ft Soil Compaction: Medium Calculation: Base depth = (0.125 + 0.25) / 2 = 0.1875 inches. Medium compaction adds 0.0625 inches. Target = min(0.25, 0.25) = 0.25 inches (capped at hard biological maximum). Slits per sq ft = 12 / 1.5 = 8. Seeds per sq ft = (3 / 1000) x 2,200,000 = 6,600. Seeds per slit per linear foot = 6,600 / 8 = 825. Result: 0.25-inch blade depth | 8 slits/sq ft | 6,600 seeds/sq ft This is operating at the absolute biological ceiling for KBG. Any increase beyond 0.25 inches triggers the endosperm starvation failure mode. The medium compaction modifier has consumed all remaining depth margin; a core aeration pass before seeding would allow staying slightly shallower and still achieving good seed-to-soil contact.

### Scenario 2: Tall Fescue Renovation on Heavily Compacted Clay Lawn

Grass Type: Tall Fescue Blade Spacing: 2 inches Seed Rate: 7 lbs / 1,000 sq ft Soil Compaction: High Calculation: Base depth = (0.25 + 0.50) / 2 = 0.375 inches. High compaction adds 0.125 inches. Target = min(0.50, 0.75) = 0.50 inches. Slits per sq ft = 12 / 2 = 6. Seeds per sq ft = (7 / 1000) x 227,000 = 1,589. Seeds per slit per linear foot = 1,589 / 6 = 265. Result: 0.50-inch blade depth | 6 slits/sq ft | 1,589 seeds/sq ft Tall Fescue’s larger endosperm reserve handles 0.50 inches without starvation risk, but this scenario is at the top of the safe range. The high compaction warning applies: blade deflection on hardpan clay can place seed inconsistently. A pre-aeration pass is the safest approach before this depth setting.

### Scenario 3: Perennial Ryegrass Sports Field Thin Spot Repair

Grass Type: Perennial Ryegrass Blade Spacing: 1.5 inches Seed Rate: 10 lbs / 1,000 sq ft Soil Compaction: Low Calculation: Base depth = (0.125 + 0.375) / 2 = 0.25 inches. Low compaction modifier = 0. Target = 0.25 inches. Slits per sq ft = 12 / 1.5 = 8. Seeds per sq ft = (10 / 1000) x 227,000 = 2,270. Seeds per slit per linear foot = 2,270 / 8 = 284. Result: 0.25-inch blade depth | 8 slits/sq ft | 2,270 seeds/sq ft A high seed rate with tight blade spacing on loose soil is a strong scenario for Ryegrass. The shallow depth in low-compaction conditions keeps the blade from tearing established turf roots unnecessarily, and 2,270 seeds per sq ft sits in a productive density range for thin spot repair without overcrowding.

## Assumptions

Grass Type: Kentucky Bluegrass (KBG) Blade Spacing: 1.5 inches Seed Rate: 3 lbs / 1,000 sq ft Soil Compaction: Medium Calculation: Base depth = (0.125 + 0.25) / 2 = 0.1875 inches. Medium compaction adds 0.0625 inches. Target = min(0.25, 0.25) = 0.25 inches (capped at hard biological maximum). Slits per sq ft = 12 / 1.5 = 8. Seeds per sq ft = (3 / 1000) x 2,200,000 = 6,600. Seeds per slit per linear foot = 6,600 / 8 = 825. Result: 0.25-inch blade depth | 8 slits/sq ft | 6,600 seeds/sq ft This is operating at the absolute biological ceiling for KBG. Any increase beyond 0.25 inches triggers the endosperm starvation failure mode. The medium compaction modifier has consumed all remaining depth margin; a core aeration pass before seeding would allow staying slightly shallower and still achieving good seed-to-soil contact. Our algorithm calculates the exact depth where your specific seed type remains biologically viable for germination. Show the calculation steps Step 1: Depth Target Lookup by Species Each grass species maps to a biological depth range based on seed size and endosperm energy reserve. KBG: 0.125 to 0.25 inches. Perennial Ryegrass: 0.125 to 0.375 inches. Tall Fescue: 0.25 to 0.50 inches. The midpoint of each range becomes the base depth. Step 2: Compaction Modifier Medium compaction adds 0.0625 inches to the base depth. High compaction adds 0.125 inches. The modified depth is then capped at the species’ hard biological maximum (KBG: 0.25″, Ryegrass: 0.50″, Fescue: 0.75″). Low compaction carries a zero modifier. Step 3: Slits per Square Foot Slits/sqft = 12 / BladeSpacing This is a simple geometric calculation: 12 linear inches per foot divided by the inter-blade distance in inches. A 1.5-inch spacing produces 8 slit rows per foot; a 2-inch spacing produces 6. Step 4: Seed Density Outputs Seeds/sqft = (SeedRate / 1000) x SeedsPerLb Seeds per pound by species (assumed averages): KBG = 2,200,000; Tall Fescue = 227,000; Perennial Ryegrass = 227,000. Seeds per slit per linear foot = Seeds/sqft / Slits/sqft Step 5: Risk Gauge Score RiskPct = (TargetDepth / 1.25) x 100 , capped between 0 and 100. The 1.25-inch ceiling represents a depth well past the fatal threshold for all supported species; 100 on the gauge means dangerous territory regardless of species. Rounding: Target depth is displayed to 3 decimal places. Slits per sq ft to 1 decimal. Seed counts are rounded to the nearest whole number. Assumptions and Limits Seeds-per-pound values are species averages. Premium certified seed lots from suppliers such as Ryan Knorr Lawn Care blends or Twin City Seed may vary from these averages by roughly 10 to 15 percent in either direction. This tool applies to cool-season grasses only. Bermuda, Zoysia, St. Augustine, and other warm-season species have different depth requirements and are not supported. The compaction modifier is a linear approximation. Precise depth compensation requires a soil penetrometer reading, not a visual assessment. Blade depth on a motorized slit seeder varies with operator speed, blade wear, and soil resistance. The calculated depth is a machine-setting target, not a guaranteed furrow depth. Always verify with a physical depth caliper on a test strip before full coverage. Soil temperature is not factored into this calculator. Germination requires a consistent soil temperature at the 2-inch depth; for most cool-season species that threshold is approximately 50 degrees Fahrenheit for KBG and 50 to 65 degrees Fahrenheit for Fescue and Ryegrass. Overseeding into existing turf may require increasing the seed application rate by 25 to 50 percent above the bag’s overseeding recommendation to compensate for competition from established grass. Blade spacing inputs outside 0.5 to 4 inches will return a validation error. Consumer-grade slit seeders typically do not go below 1 inch or above 3 inches in practice. The calculator does not account for pass direction. A perpendicular second pass can double effective seed coverage at the same rate; the output density numbers reflect a single-direction pass. Seeds-per-pound values are species averages. Premium certified seed lots from suppliers such as Ryan Knorr Lawn Care blends or Twin City Seed may vary from these averages by roughly 10 to 15 percent in either direction. This tool applies to cool-season grasses only. Bermuda, Zoysia, St. Augustine, and other warm-season species have different depth requirements and are not supported. The compaction modifier is a linear approximation. Precise depth compensation requires a soil penetrometer reading, not a visual assessment. Blade depth on a motorized slit seeder varies with operator speed, blade wear, and soil resistance. The calculated depth is a machine-setting target, not a guaranteed furrow depth. Always verify with a physical depth caliper on a test strip before full coverage. Soil temperature is not factored into this calculator. Germination requires a consistent soil temperature at the 2-inch depth; for most cool-season species that threshold is approximately 50 degrees Fahrenheit for KBG and 50 to 65 degrees Fahrenheit for Fescue and Ryegrass. Overseeding into existing turf may require increasing the seed application rate by 25 to 50 percent above the bag’s overseeding recommendation to compensate for competition from established grass. Blade spacing inputs outside 0.5 to 4 inches will return a validation error. Consumer-grade slit seeders typically do not go below 1 inch or above 3 inches in practice. The calculator does not account for pass direction. A perpendicular second pass can double effective seed coverage at the same rate; the output density numbers reflect a single-direction pass. Critical Warnings The 1-Inch Burial Failure for KBG: Kentucky Bluegrass is among the smallest-seeded turf grasses available. Its endosperm, the stored energy that powers germination before photosynthesis begins, is proportionally tiny. When buried at 1 inch or deeper, the seedling successfully germinates but runs out of fuel in the dark before the coleoptile can break the soil surface. The seed will appear to have germinated (the radicle is active below ground) but the lawn will show zero visible establishment. This is not a soil or fertilizer problem. It is a physics and biology problem, and it is irreversible once the seed has been placed. Depth Beyond 0.25 Inches Triggers Endosperm Starvation Risk for KBG: The biological ceiling for Kentucky Bluegrass is 0.25 inches. Even 0.375 inches, a depth appropriate for Ryegrass, places KBG seedlings in a marginal energy situation. The calculator will flag this with a danger-level warning and the gauge bar will shift toward the risk zone immediately. Do not override this warning. Wide Blade Spacing Reduces Coverage Without Compensating Depth: Blade spacings above 2.5 inches produce fewer than 5 slit rows per foot. At standard application rates, this leaves large fractions of the soil surface unseeded. The fix is a second perpendicular pass, not a deeper blade setting. High Compaction Without Pre-Aeration Produces Inconsistent Furrows: On clay-heavy or heavily trafficked soils, slit seeder blades deflect unpredictably. The furrow depth varies by several tenths of an inch across a single pass, placing some seed at the safe ceiling and some significantly deeper. A core aeration pass one to two weeks before slit seeding is the established solution. The lawn aeration holes per square foot calculator can help you plan the correct aeration pass density for your area size. Minimum Standards KBG blade depth must never exceed 0.25 inches regardless of compaction level. The compaction modifier for KBG in this tool is constrained so the output never exceeds this threshold. Verify blade depth with a physical gauge on a test strip before seeding the full area. Do not rely on the machine’s depth adjustment dial alone; wear and mechanical play introduce real-world variance. Starter fertilizer should be applied at seeding or within 24 to 48 hours. Formulations compatible with Mesotrione (sold as Tenacity) are safe for use on KBG and Fescue seedings and allow simultaneous crabgrass suppression without damaging germinating seed. Post-seeding watering must keep the top 0.25 to 0.5 inches of soil consistently moist until first mow. For irrigation planning after seeding, the turf watering calculator on this site can help set run times based on your system’s output rate. Competitor Trap: Most slit seeding guides on the web instruct users to set blade depth to “1/4 inch to 1/2 inch” as a universal recommendation across all grass types. This is correct for Fescue and borderline for Ryegrass, but it is a fatal instruction for Kentucky Bluegrass. Applying a 0.5-inch depth setting to KBG seed places it at double the biological maximum, guaranteeing endosperm starvation in the furrow. The missing variable in every generic guide is seeds-per-pound, which is the proxy for endosperm size. Small seeds have small fuel tanks. A flat depth recommendation that ignores species biology is the most common reason otherwise well-executed overseeding projects fail with no obvious cause. If your overseeding plan also includes nitrogen management after establishment, the grass clippings nitrogen calculator provides a way to quantify how much nitrogen you can return through mulch mowing once the new turf is established, reducing your fertilizer inputs during the critical first season. KBG blade depth must never exceed 0.25 inches regardless of compaction level. The compaction modifier for KBG in this tool is constrained so the output never exceeds this threshold. Verify blade depth with a physical gauge on a test strip before seeding the full area. Do not rely on the machine’s depth adjustment dial alone; wear and mechanical play introduce real-world variance. Starter fertilizer should be applied at seeding or within 24 to 48 hours. Formulations compatible with Mesotrione (sold as Tenacity) are safe for use on KBG and Fescue seedings and allow simultaneous crabgrass suppression without damaging germinating seed. Post-seeding watering must keep the top 0.25 to 0.5 inches of soil consistently moist until first mow. For irrigation planning after seeding, the turf watering calculator on this site can help set run times based on your system’s output rate. Competitor Trap: Most slit seeding guides on the web instruct users to set blade depth to “1/4 inch to 1/2 inch” as a universal recommendation across all grass types. This is correct for Fescue and borderline for Ryegrass, but it is a fatal instruction for Kentucky Bluegrass. Applying a 0.5-inch depth setting to KBG seed places it at double the biological maximum, guaranteeing endosperm starvation in the furrow. The missing variable in every generic guide is seeds-per-pound, which is the proxy for endosperm size. Small seeds have small fuel tanks. A flat depth recommendation that ignores species biology is the most common reason otherwise well-executed overseeding projects fail with no obvious cause. If your overseeding plan also includes nitrogen management after establishment, the grass clippings nitrogen calculator provides a way to quantify how much nitrogen you can return through mulch mowing once the new turf is established, reducing your fertilizer inputs during the critical first season.

## Limitations and safety

Seeds-per-pound values are species averages. Premium certified seed lots from suppliers such as Ryan Knorr Lawn Care blends or Twin City Seed may vary from these averages by roughly 10 to 15 percent in either direction. This tool applies to cool-season grasses only. Bermuda, Zoysia, St. Augustine, and other warm-season species have different depth requirements and are not supported. The compaction modifier is a linear approximation. Precise depth compensation requires a soil penetrometer reading, not a visual assessment. Blade depth on a motorized slit seeder varies with operator speed, blade wear, and soil resistance. The calculated depth is a machine-setting target, not a guaranteed furrow depth. Always verify with a physical depth caliper on a test strip before full coverage. Soil temperature is not factored into this calculator. Germination requires a consistent soil temperature at the 2-inch depth; for most cool-season species that threshold is approximately 50 degrees Fahrenheit for KBG and 50 to 65 degrees Fahrenheit for Fescue and Ryegrass. Overseeding into existing turf may require increasing the seed application rate by 25 to 50 percent above the bag’s overseeding recommendation to compensate for competition from established grass. Blade spacing inputs outside 0.5 to 4 inches will return a validation error. Consumer-grade slit seeders typically do not go below 1 inch or above 3 inches in practice. The calculator does not account for pass direction. A perpendicular second pass can double effective seed coverage at the same rate; the output density numbers reflect a single-direction pass. Critical Warnings The 1-Inch Burial Failure for KBG: Kentucky Bluegrass is among the smallest-seeded turf grasses available. Its endosperm, the stored energy that powers germination before photosynthesis begins, is proportionally tiny. When buried at 1 inch or deeper, the seedling successfully germinates but runs out of fuel in the dark before the coleoptile can break the soil surface. The seed will appear to have germinated (the radicle is active below ground) but the lawn will show zero visible establishment. This is not a soil or fertilizer problem. It is a physics and biology problem, and it is irreversible once the seed has been placed. Depth Beyond 0.25 Inches Triggers Endosperm Starvation Risk for KBG: The biological ceiling for Kentucky Bluegrass is 0.25 inches. Even 0.375 inches, a depth appropriate for Ryegrass, places KBG seedlings in a marginal energy situation. The calculator will flag this with a danger-level warning and the gauge bar will shift toward the risk zone immediately. Do not override this warning. Wide Blade Spacing Reduces Coverage Without Compensating Depth: Blade spacings above 2.5 inches produce fewer than 5 slit rows per foot. At standard application rates, this leaves large fractions of the soil surface unseeded. The fix is a second perpendicular pass, not a deeper blade setting. High Compaction Without Pre-Aeration Produces Inconsistent Furrows: On clay-heavy or heavily trafficked soils, slit seeder blades deflect unpredictably. The furrow depth varies by several tenths of an inch across a single pass, placing some seed at the safe ceiling and some significantly deeper. A core aeration pass one to two weeks before slit seeding is the established solution. The lawn aeration holes per square foot calculator can help you plan the correct aeration pass density for your area size. Minimum Standards KBG blade depth must never exceed 0.25 inches regardless of compaction level. The compaction modifier for KBG in this tool is constrained so the output never exceeds this threshold. Verify blade depth with a physical gauge on a test strip before seeding the full area. Do not rely on the machine’s depth adjustment dial alone; wear and mechanical play introduce real-world variance. Starter fertilizer should be applied at seeding or within 24 to 48 hours. Formulations compatible with Mesotrione (sold as Tenacity) are safe for use on KBG and Fescue seedings and allow simultaneous crabgrass suppression without damaging germinating seed. Post-seeding watering must keep the top 0.25 to 0.5 inches of soil consistently moist until first mow. For irrigation planning after seeding, the turf watering calculator on this site can help set run times based on your system’s output rate. Competitor Trap: Most slit seeding guides on the web instruct users to set blade depth to “1/4 inch to 1/2 inch” as a universal recommendation across all grass types. This is correct for Fescue and borderline for Ryegrass, but it is a fatal instruction for Kentucky Bluegrass. Applying a 0.5-inch depth setting to KBG seed places it at double the biological maximum, guaranteeing endosperm starvation in the furrow. The missing variable in every generic guide is seeds-per-pound, which is the proxy for endosperm size. Small seeds have small fuel tanks. A flat depth recommendation that ignores species biology is the most common reason otherwise well-executed overseeding projects fail with no obvious cause. If your overseeding plan also includes nitrogen management after establishment, the grass clippings nitrogen calculator provides a way to quantify how much nitrogen you can return through mulch mowing once the new turf is established, reducing your fertilizer inputs during the critical first season.

## Related calculators

- [Calculators & Tools](https://theyieldgrid.com/category/garden-calculators/)
- [grass seed calculator](https://theyieldgrid.com/grass-seed-calculator/)
- [pure live seed calculator](https://theyieldgrid.com/pure-live-seed-calculator/)
- [lawn aeration holes per square foot calculator](https://theyieldgrid.com/lawn-aeration-holes-per-square-foot/)
- [turf watering calculator](https://theyieldgrid.com/turf-watering-calculator/)
- [grass clippings nitrogen calculator](https://theyieldgrid.com/grass-clippings-nitrogen-calculator/)
- [topsoil calculator](https://theyieldgrid.com/topsoil-calculator/)
- [sod calculator](https://theyieldgrid.com/sod-calculator/)
- [Prev Previous](https://theyieldgrid.com/gravel-driveway-slope-calculator/)
- [Next Next](https://theyieldgrid.com/rain-garden-sizing-calculator/)

## Provenance

- Model ID: `tyg-2810`
- Model version: `1.0.0`
- Reviewed by: Umer Hayiat
- Page modified: 2026-08-24T08:36:28
- Runtime SHA-256: `a0fb292adf4db1574e7bdce8994c29038ecbc82c56ecead0e15925e8ba0fdb42`

This Markdown document is a machine-readable mirror. The canonical interactive calculator is the HTML page linked above.